The new ECO range of dehumidifiers from Ebac is one of the most efficient commercial dehumidifier ranges, being designed to help reducing the carbon footprint while delivering a high water extraction rate and a very competitive energy use / water extracted ratio.
The ECO60 has a maximum l/kWh (water extraction per kW of power consumed) of 1.75 l/kWh. This is achieved by utilizing a high capacity reciprocating compressor and an new environmentally friendly R417a refrigerant. This “no frills” dehumidifier is basically “plug and play”, connect the hose to a suitable drainage point or bucket, plug the unit into a normal 13A wall socket and the unit takes care of itself and its surroundings. The ECO60 is equipped with a “Hot Gas” defrost system, ensuring a quick and efficient clearing of ice from the coil, allowing a minimum operating temperature of 3°C.
The collapsible handle ensures the unit can be transported and installed easily. Fitted with semi-pneumatic shock absorbing tyres, the unit can wheeled across rough terrain without the worries of damage to the units internal components.
- Voltage: 230
- Phase: 1
- Frequency(Hz): 50
- Power(kW): 0.7
- Current(A): 3.5
- Airflow(m3/hr): 275
- Noise Level(dba): 50
- Effective Volume(m3): 200
- Typical Extraction(l/d): 15
- Min Operating Temp (°C): 3
- Max OperatingTemp (°C): 35
- Airflow: 275 cubic metres per hour
- Effective Volume: 200 cubic metres
- Water Extraction: 15 litres per day at 30 degrees C, 80% Relative Humidity
- Refrigerant: R417a
- Weight: 35kg
- Dimensions: H590 x W510 x D420mm