GRADE A2 - Smeg KDD60VXE-2 60cm Stainless Steel and Black Glass Island Downdraft Hood

This is a graded product. A2 products have minor visible dents & scuffs. All products are tested and are in good working order.

GRADE A2

There is a small scratch on the rear of the hood. You won’t be able to see it as the hood is built-in. There is some brown tape to the hood which won’t come off. The motor has got some scratches to it but won’t be seen. Please see images.

Smeg 60cm wide downdraft extractor in stainless steel and black glass

Key Features

• Energy rating: B
• 1 High performance motor, 270 W
• Electronic controls
• 4 speeds, plus intensive (10 mins)
• 1 x 7 W LED light
• 2 Aluminium grease filters
• Filter cleaning/replacement indicator
• Automatic switch-off
• Internal re-circulation possible
• Non-return valve
• Vent outlet Ø 150 mm
• Nominal power 277 W
• Extraction rates IEC 61591: 135-375 m³/hr (570 intensive)
• Noise level (dB(A) IEC 60704-2-13): 44-62 dB(A) (71 intensive)

NB: Downdraft extractors can be installed anywhere in a kitchen but are ideal for when a hob is situated in an island unit. The extractor is installed under the worktop directly behind, or to the side of, the hob so that when it is not in use, it can be completely hidden from view. A Downdraft extractor can be vented or recirculated. When it is vented the ducting has to be passed under the flooring, below the cupboards or along the back of the cupboards - it is important therefore to decide on the hood before refurbishment work begins. The length of the ducting will affect the extraction performance, if it has to travel too far to go to an outside wall or there are too many turns in the ducting you are advised to recirculate the extractor.

When using with a gas hob, the hob must have a Maximum power of 12.4kW and 5 zones.

Includes all standard paperwork.