The ECP112SS is a 110cm wide chimney hood in stainless steel with a curved glass canopy from CDA.
This model has 3 speeds selected by push button controls and aluminium grease filters. There are two 20 Watt halogen lights to illuminate your hob. The motor gives you a good extraction rate of 377 cubic metres per hour, which is ideal for kitchens up to 47 cubic metres, and a relatively low noise level at 60 decibels.
As a wall-mounted extractor the ECP112SS can be installed to re-circulate the air into the kitchen or to be ducted outside. If you are choosing to re-circulate you’ll need a charcoal filter and if you’re ducting out you’ll need a ducting kit.
CDA guarantee their appliances for 5 years on the parts and 2 years on the labour. Please ensure you register your appliance to receive this.
- Ducted or recirculating modes
- 3 speeds
- Push button control
- Aluminium grease filter
- 2 x 20 W halogen lights
- Required height over gas hob: 700 mm (min)
- Required height over electric hob: 600 mm (min)
- Outlet diameter: 150 mm
- Noise level: 60 dBA
- Extraction rate: 377 m³/hr
- Rated electrical power: 100 W
- Power supply required: 3 amps
Fitting note: Please ensure that you check the ceiling height is sufficient to allow the required clearance between the hob and extractor