The ECP91SS is a 90cm wide chimney hood in stainless steel with a curved glass canopy from CDA.
This model has 3 speeds selected by push button controls and aluminium grease filters. There are two 50 Watt halogen lights to illuminate your hob. The twin fan motor gives you a good extraction rate of 358 cubic metres per hour, which is ideal for kitchens up to 44 cubic metres, and a relatively low noise level at 55 decibels.
As a wall-mounted extractor the ECP91SS can be installed to re-circulate the air into the kitchen or to be ducted outside. If you are choosing to re-circulate you’ll need 2 charcoal filters and if you’re ducting out you’ll need a ducting kit.
CDA guarantee their appliances for 5 years on the parts and 2 years on the labour. Please ensure you register your appliance to receive this.
Features
- Ducted/recirculating installation
- 3 speeds
- Push button control
- Aluminium grease filter
- 2 x 50 W halogen lights
- Twin fan motor
Technical Specifications
- Required height over gas hob: 700mm
- Required height over electric hob: 600mm
- Outlet diameter: 120 mm
- Noise level: 55 dBA
- Extraction rate: 358 m³/hr
- Rated electrical power: 240 W
- Power supply required: 3 amps
N.B. 2 x CHA4 charcoal filters required if re-circulating
Question from LC: Asked on 23/10/2012 thanks, you say i need a ducting kit, which one?
lee
They are as follows:
AED51, AED53 and AED54.
Regards,
Phil.
Question from LC: Asked on 23/10/2012 Hi, If i buy this product do i need a ducting kit or is everything i need included?
Regards,
Phil.
Question from Snugpip: Asked on 08/10/2012 can the glass be cleaned in the dishwasher?
The glass is not a removable component and therefore cannot be removed to be washed in the dishwasher. A nice damp cloth will do the trick.
Question from Alex Durnall: Asked on 05/10/2012 Is there a curved splashback to match this product