electriQ 90cm Traditional Chimney Cooker Hood Satin Black

High quality design

With its unbranded appearance, timeless aesthetics and classic black finish, this great value chimney cooker hood is perfectly suited to match any kitchen environment and budget too. In fact, you'll be hard done by to find anything that even comes close to the high quality standard of this Electriq model at this great price.

Noise

Unlike conventional extractor fans which can often be intrusive when in operation, this cooker hood delivers impressive extraction performance and efficiency that result in lower noise emissions. This means you can leave the extractor running whilst you relax, eat or host in the kitchen without being disturbed.

Push button controls

There are five easy push buttons located to the right hand side of the hood. With a simple push of a button you can activate the light or change the speed of the extractor. There are three speed settings allowing you to select a speed which is appropriate for what you have cooking. The more steam and odour in the kitchen the higher speed you will need.

Light it up

This chimney hood has a large strip of lighting positioned perfectly at the back of the hood. There are two 40Watt incandescent bulbs in this panel, lighting up your space giving you a clear view of your culinary creations.

Extract or re-circulate?

This cooker hood boasts of extraction up to 329 cubic meters per hour - making it ideal for larger kitchens. The grease filter is aluminium so that it's easy to clean and dishwasher safe. You can choose to either extract the steamy air or re-circulate it.

Please note - This hood is top venting . The vent is located within the lower section of the chimney, the flexible pipe can be turned at 90 degrees to vent out of the wall at any point.

Extracting the air - Odours, grease, smoke and steam are extracted from the kitchen to the outside of your house via ducting.

This highly effective method requires a vent through an outside wall which can be expensive to install. To help keep costs down, we've included a 150mm diameter flexible hose that extends to 2m. If you have ducting already in place from an existing hood but of a different diameter, you can reuse it and connect to this cooker with the 120-150mm adaptor that also comes supplied.

Recirculating the air- Odours, grease and smoke are drawn through a series of filters, before releasing the purified air back into the kitchen.

This method benefits from low installation costs and can be used in almost all kitchens. For optimum performance you will need to replace your carbon filters every 3 months. If you decide you want the air to re-circulate then you simply need to purchase 1 x twin pack of carbon filters - eIQCF130 .

Dimensions

What size hood do I need? - Ideally if you have a 60cm hob or cooker then you would need a 60cm hood to work efficiently. However, this is not a set rule, if you have enough space then you can always opt for something a little larger.

Handy hint - If you are replacing an existing hood measure the entire width including any glass.