TRADITIONAL, VERSATILE DESIGN
- Top selling traditional Chimney Hood
- Versatile & unbranded design
- Contemporary stainless steel
- Easy to use push button controls
- High performance 400m3/h extraction rate
High Quality
With its unbranded appearance, traditional design and stainless steel finish, this great value chimney cooker hood is perfectly suited to match any kitchen environment and budget too. In fact, you'll be hard done by to find anything that even comes close to the high quality standard of this Electriq model at this great price.
Noise
Unlike conventional extractor fans which can often be intrusive when in operation, this cooker hood delivers impressive extraction performance and efficiency that result in lower noise emissions. This means you can leave the extractor running whilst you relax, eat or host in the kitchen without being disturbed.
Push Button Controls
There are five easy push buttons located on the front of the hood. With a simple push of a button you can activate the light or change the speed of the extractor. There are three speed settings allowing you to select a speed which is appropriate for what you have cooking. The more steam and odour in the kitchen the higher speed you will need.
Light It Up
This chimney hood has a large strip of lighting positioned perfectly at the back of the hood. There are two 40Watt incandescent bulbs in this panel, lighting up your space giving you a clear view of your culinary creations.
Extract Or Re-circulate?
This cooker hood boasts of extraction up to 400 cubic meters per hour - making it ideal for larger kitchens. The grease filter is aluminium so that it's easy to clean and dishwasher safe. You can choose to either extract the steamy air or re-circulate it.
Please note - This hood is top venting . The vent is located within the lower section of the chimney, the flexible pipe can be turned at 90 degrees to vent out of the wall at any point.
Extracting The Air
Odours, grease, smoke and steam are extracted from the kitchen to the outside of your house via ducting.
This highly effective method requires a vent through an outside wall which can be expensive to install. To help keep costs down, we've included a 150mm diameter flexible hose that extends to 2m. If you have ducting already in place from an existing hood but of a different diameter, you can reuse it and connect to this hood with the 120-150mm adaptor that also comes supplied.
Recirculating The Air
Odours, grease and smoke are drawn through a series of filters, before releasing the purified air back into the kitchen.
This method benefits from low installation costs and can be used in almost all kitchens. Annual replacement of the carbon filters is necessary to ensure optimum performance. If you decide you want the air to re-circulate then you simply need to purchase the carbon filter pack - eiQMIDCARBON.
Features:
- Top selling traditional Chimney Hood
- Contemporary stainless steel
- Unbranded to suit all kitchens
- Powerful 400m3/h extraction rate
- Unobtrusive 65dB noise level
- 2 Incandescent lights
- Easy to use push button controls
- 125W Motor
- Air outlet: 150mm with 150/120mm adaptor
Question from Gail: Asked on 26/03/2016 Can this cooker hood just be plug in using a 3 pin plug? If not do you sell any that do not require installation I'm looking for a simple fix hood that only needs to be plugged in
Question from Paul: Asked on 18/01/2016 Does this model have a adjustable height chimney.