High-quality, contemporary design
This electriQ hood has a contemporary look, made from quality stainless steel with a satin finish which is unbranded to coordinate perfectly with all your other appliances. Featuring a sleek and seamless touch control front this hood is the perfect finishing touch for the modern kitchen. Effectively removing odours and vapours from the kitchens.
3 Speed settings
Both the extraction speed and the LED lighting are controlled by the glossy touch buttons on the front of the hood. There are three speed settings enabling you to select a speed to suit what's cooking. The more odours and vapour, the higher the extraction speed.
Low noise
Operating at 63db this hood emits low noise. Quieter than your dishwasher it's easy to enjoy a meal in your kitchen whilst the hood is still operating.
Timer
Don't worry about forgetting to turn the extractor off simply press the timer button when you have finished cooking and after 9 minutes the cooker hood will switch off automatically after clearing the remaining steam and odours.
Efficient filtration
Fitted with an aluminium grease filter to effectively remove grease from the air. All electriQ cooker hoods have easy-to-clean, dishwasher-safe grease filters already included. We would recommend that these be replaced annually. If you are unable to vent the air out externally, the hood can be operated in recirculating air mode, using the optional carbon filter pack which will take away any odours. The carbon filter pack needs to be purchased separately. With this electriQ hood, you have the option to extract or recirculate the air. If you are unsure which you should go for here is a simple guide to both;
Extracting air
- Odours, grease, smoke & steam are extracted
- Air is extracted via ducting to the outside of your house
- This requires a vent through an outside wall
- Includes a 120-150 adaptor for pre-existing 125mm ducting
Recirculating air
- Odours, grease & smoke are drawn through a series of filters
- The purified air is then released back into the kitchen
- This method can be used in all kitchen types, eliminates ducting
- With this method, you will need a carbon filter pack
- The carbon filter pack needs to be replaced every 3-6 months
Features:
- Contemporary wall-mounted slimline touch control chimney design
- Unbranded to coordinate with existing appliances
- Maximum extraction rate: 308m³/h
- 2 LED lights to give clear visibility of the cooking space
- Easy-to-use touch controls with 3 speeds
- Quiet extraction noise - 63db
- Aluminium dishwasher-safe grease filter
- Air outlet 150mm with 120/150mm adaptor
- Dimensions: H45 - 83 x W60 x D45.5cm
- Energy rating - B
- 65W Motor
What's in the box?
- Slimline hood
- Aluminium dishwasher-safe grease filter
- 120-150mm adaptor
- LED lights
Question from Mohammed Iqbal: Asked on 18/09/2025 Hi in your installation package can you take off the old extractor fan as i am unsure how please.
Hi Mohammed, yes, our team will remove your existing cooker hood and install your new one. They will not do any core drilling, as you will need a builder for this, and we will only connect to existing connections. If you need additional ducting, please ensure you have this ready for our team's arrival. Thank you.