High-quality, contemporary design
This electriQ hood has a contemporary look, made from quality stainless steel with a satin finish which is unbranded to coordinate perfectly with all your other appliances. Featuring a sleek and seamless touch control front this hood is the perfect finishing touch for the modern kitchen. Effectively removing odours and vapours from the kitchens.
3 Speed settings
Both the extraction speed and the LED lighting are controlled by the glossy touch buttons on the front of the hood. There are three speed settings enabling you to select a speed to suit what's cooking. The more odours and vapour, the higher the extraction speed.
Low noise
Operating at 63db this hood emits low noise. Quieter than your dishwasher it's easy to enjoy a meal in your kitchen whilst the hood is still operating.
Timer
Don't worry about forgetting to turn the extractor off simply press the timer button when you have finished cooking and after 9 minutes the cooker hood will switch off automatically after clearing the remaining steam and odours.
Efficient filtration
Fitted with an aluminium grease filter to effectively remove grease from the air. All electriQ cooker hoods have easy-to-clean, dishwasher-safe grease filters already included. We would recommend that these be replaced annually. If you are unable to vent the air out externally, the hood can be operated in recirculating air mode, using the optional carbon filter pack which will take away any odours. The carbon filter pack needs to be purchased separately. With this electriQ hood, you have the option to extract or recirculate the air. If you are unsure which you should go for here is a simple guide to both;
Extracting air
- Odours, grease, smoke & steam are extracted
- Air is extracted via ducting to the outside of your house
- This requires a vent through an outside wall
- Includes a 120-150 adaptor for pre-existing 125mm ducting
Recirculating air
- Odours, grease & smoke are drawn through a series of filters
- The purified air is then released back into the kitchen
- This method can be used in all kitchen types, eliminates ducting
- With this method, you will need a carbon filter pack
- The carbon filter pack needs to be replaced every 3-6 months
Features:
- Contemporary wall-mounted slimline touch control chimney design
- Unbranded to coordinate with existing appliances
- Maximum extraction rate: 308m³/h
- 2 LED lights to give clear visibility of the cooking space
- Easy-to-use touch controls with 3 speeds
- Quiet extraction noise - 63db
- Aluminium dishwasher-safe grease filter
- Air outlet 150mm with 120/150mm adaptor
- Dimensions: H45 - 83 x W60 x D45.5cm
- Energy rating - B
- 65W Motor
What's in the box?
- Slimline hood
- Aluminium dishwasher-safe grease filter
- 120-150mm adaptor
- LED lights
Question from Danny: Asked on 03/03/2026 Does it plug straight into wall socket if yes how long is the lead please.
Hi, The electriQ 60cm Touch Control Slimline Chimney Hood (EIQ60TOUCHSLIMBK) comes ready to plug straight into a standard wall socket. It includes a power cable with a length of approximately 1.5 metres (150?cm), so no hard-wiring is required.
Thank you.
Question from Cliff: Asked on 09/01/2026 Height from worktop
Hi, The electriQ 60?cm Slimline Chimney Hood has an adjustable height. The chimney can be set so the total height from the bottom of the hood to the top is between 45?cm and 83?cm. For best results, the bottom of the hood should sit around 60–75?cm above your hob, depending on your hob type.
Thank you.