The Techaudio AV-1700 is compact, flexible, easy to use and is extremely efficient. Use as a standalone mixer and amp, or as a mixer which outputs to a bigger amp or powered loudspeakers.
4 x Stereo Inputs
4 stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 3 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 4 is via a 3.5mm minijack connector, and is duplicated on the front and rear panels for easy access.
A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the AV-1700 affects the output level.
It uses a professional XLR connector and the input is balanced to eliminate electro-magnetic noise induced on long cables. The microphone input has “Phantom Power” – a voltage which is required by condenser-type microphones such as lectern microphones.
The IR remote control gives the user bass and treble adjustment and direct input selection. The AV-1700 can be controlled by a control device such as Techconnect Control via IR or RS-232.
The clear simple interface offers the user just two dials.
If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again.
Optional mounting hardware is available which allows attachment to a wall, projector ceiling pole, or rack.