The Bosch 90cm Wall-Mounted Cooker Hood - Black is a high-powered cooker hood that will quickly remove odors and fumes from your kitchen. It has a width of 90cm and comes in a black finish with the perfect features for efficient use at your home.
Key Features
- Flexibility and Efficiency - maximum power with minimal noise is achieved by the hood in the air exhaust mode
- Easy-to-clean interior - hidden screws and cables along with rounded edges make cleaning easy
- Amazon Alexa Voice Control - manage your appliances with your voice
- Cooktop-based hood control - use the hob to control your hood
- Home Connect - hoods with smart connectivity make life easier
- Air Quality Sensor: Automatic Sensor - based performance control for best results
- Powerful and energy-efficient motor - save energy while keeping the peace in your kitchen
- Extra-silent hood - for more peace and quiet at home
- PerfectAir Sensor - monitors the air while you cook
- DirectSelect Control - you can set the desired power level and control
Flexibility and Efficiency.
Maximum power with minimal noise is achieved by the hood in the air exhaust mode. However, such a connection is not always possible. As an alternative, a recirculation mode using carbon filters that absorb odors can be considered. The need for periodic replacement of carbon filters is more than offset by the ease of installation and ease of maintenance.
The safer, easier way to clean your hood.
To achieve a perfectly clean kitchen, you occasionally need to clean your hood. The interior design of Bosch hoods are optimized for easy and safe cleaning: there are no sharp edges and corners, no visible cables, and no screws.
Manage your appliance with your voice, thanks to the Amazon Alexa Voice Control.
Thanks to partnering with Amazon Alexa, your appliance can be controlled by voice as well. If the relevant “Home Connect” skill within the Alexa app is available for your country & language, then activate the respective skill to establish the connection between Amazon Alexa and your home appliance.
Use the hob to control the hood.
Control the hood via your hob and keep your hands free to cook. With the hob and the hood connected by Wi-Fi, the hood turns on automatically when you start cooking, and runs on for a short while after you stop. And if you want to adjust the extractor power, or the lighting, the controls are right there in front of you. More control with less hassle.
The extractor hood gets smart.
Hoods with smart connectivity simply make sense. When they detect steam or odours, they activate automatically. When you’re around the house or out and about, you can connect and control the hood using the Home Connect App. Life just got smarter.
The powerful and energy-efficient motor.
Your extractor hood just got a whole lot quieter: the EcoSilence Drive uses strong permanent magnets, with almost no power loss due to friction. That means it’s not only efficient but quiet and long-lasting too. Save energy while keeping the peace in your kitchen.
The optimum air volume for kitchens of all sizes.
No matter whether you have an open-plan kitchen and living room or a small, closed-off kitchen. We offer the optimum air volume for kitchens of all sizes. Air should be exchanged 6 to 12 times an hour to ensure a consistently pleasant ambience. To do so, the air delivery volume or power of the cooker hood must be appropriate to the room volume.
The extra-silent hood.
It’s hard enough keeping the home clean and tidy, let alone calm and quiet. Our extra-silent hoods are a real help. Thanks to special noise-reduction features, they whisper at every power level, for more peace and quiet at home.
Perfect ventilation.
The PerfectAir sensor monitors the air while you cook. It automatically selects the correct power level to capture steam and odours, and keep noise to a minimum. When you’ve finished cooking, the fan continues to run until the kitchen air is fresh and clear. That way, you can focus your attention on cooking and let your hood do the rest.
DirectSelect control.
With the new DirectSelect control, you can set the desired power level and control such functions as the PerfectAir sensor, after-running, and lighting level directly. You can also read the filter saturation display so that you always know when the filter needs cleaning, to ensure it always operates at its best.
