This industrial dehumidifier is ideal for both commercial or residential drying and flood restoration. Extracting 30 litres of damaging moisture per day, the 10560RD-GB has the capacity you need to restore the health of your environment quickly following any type of water damage. Easily mobile and energy efficient, this unit features an integrated condensate pump, low-temperature operation, and rugged construction to handle the harshest environments and assist with proper restoration. For room size around 40-50 sqm.
SAVE TIME AND MONEY
No more worries of forgetting to empty buckets, due to customer demands the RM range of products incorporate high capacity condensate pumps. The 3m maximum pump height will ensure no installation is too difficult. Install, connect to a permanent drain, and forget until the job is complete. With the aid of a purge facility, all residual water can be drained from the pump tank prior to moving the machine therefore eliminating the chances of spillage.
LOW TEMPERATURE OPERATION VIA HOT GAS DEFROST TECHNOLOGY
The 10560RD-GB is equipped with a “Hot Gas” defrost system, ensuring a quick and efficient clearing of ice from the coil, allowing a minimum operating temperature of 3°C.
ATTENTION TO DETAIL
Sometimes the less expensive features are overlooked. The 10560RD-GB is supplied complete with cable and hose tidies, Not only will this reduce the possibility of damage when the units are transported, but also provides easy installation when positioning the equipment.
Room size: 40-50 sqm
Voltage: 230 / 110 V
Frequency (Hz): 50
Power (kW): 0.68
Current (A): 3/6
Airflow (m3/hr): 390
Noise Level (dba): 52
Effective Volume (m3): 250
Min Operating Temp (°C): 3
Max Operating Temp (°C): 35
Water Extraction: 30 litres per day at 30 degrees C, 80% Relative Humidity
Dimensions: H945 x W545 x D492 mm