Appliances Direct
Laptops Direct
Drones Direct
Better Bathrooms
Furniture 123
Dehumidifiers
Outdoor Living
Aircon
My Account

Track order Trade enquiries Public Sector enquiries
Inc. VAT vat switch show inc Ex. VAT Inc. VAT vat switch show ex Ex. VAT
£ currency switch £ currency switch

White Wall Mounted Electric Fireplace Suite with LED Lights 52 inch- Amberglo

SKU: AGL010 Quickfind Code: 1304252
Low Stock

LIMITED STOCK! Less than 10 remaining

Was: £499.97     You save: £120
£379.97
Product options
Other Colour Options
Why buy me
  • Set the mood with 3 realistic flame effects and 2 LED downlights
  • Enjoy the ambiance of the realistic flames and lights - without the heat
  • Schedule when the fire turns on with the seven-day timer
  • Choose between a log, crystal or pebble fuel bed
  • Comes with an accompanying remote control for ease of use
  • Three realistic LED flame adjustments
  • WxDxH - 132cm x 21cm x 58cm
  • Enjoy the ambiance of the lights without the heat
click

All about me

This modern wall-mounted fire is constructed with a modern white surround, features two integrated LED downlights and three realistic LED flame settings to add to your rooms ambience.  In addition, it comes with an accompanying remote control for ease of use and you can enjoy the ambiance of the flickering flames and lights -  without the heat.  With a light-up, open front fuel bed including logs, crystals or pebbles you can mix and match your fuel bed's layout.Heat is emitted from vents underneath the top panel of the fire, allowing you to install a TV above to complete your media wall.

Simply mount the fire flush to the wall (with a minimum of 30cm between the base of the fire and the floor) using the fixings provided - and as it's electric, there's no need for a chimney or flue – just plug it in and you're good to go.

Authentic fire sounds - This Amberglo fire uses a fan and produces a light crackling sound to create ambience, like a real fire. It's a similar decibel rating to the sound of rain or leaves rustling, so it won't cause any disruption.  

Need to know

  • Dimensions: W132 x D21 x H58 cm
  • Installation Requirements: Minimum of 30cm between the base of the fire and the floor
  • Style: Wall mounted
  • Material: Wood
  • Finish: Painted
  • Colour: White and grey
  • Cable Length: 1.3m - exiting the fire from the bottom right hand side
  • Heat levels: 2 - 1kW and 2kW
  • Voltage: 220-240V
  • Fuse: 13 AMP
  • Weight: 21.8kg
  • Controls: Control panel and remote control included
  • Safety thermal cut off: Yes
  • Auto window detection: Yes – turns fire off if the temperature isn’t rising
  • Fixings included: Yes
  • Assembly Required: Yes
 
Key Information
Assembly not required, plug in and go
Brand Amberglo
Fittings Included
Surround Included
Dimensions & Weight
Width 132cm
Depth 21cm
Height 58cm
Weight 29.6kg
Product Details
Colour White
Material Metal
Finish Painted
Glass Front
Mounting Wall mounted
Temperature Range 16-30Degrees
Heat Transfer Type Fan
Heat Exit Top Panel
Heat Settings 2kW
Number of heating levels 2
Number of Flame Settings 3
Brightness Settings
Flame Effect Type LED Flame Effect
Fuel type Electric
Fuel Bed Options logs, crystals, pebbles
Fuel Bed Included
Remote control
Control panel
Control Panel Location Top Right of Fire
Cable length 1.3M
Cable Side Right Side
Warranty
Guarantee 1 year

Question from Adrian: Asked on 24/01/2021 I need a new remote for the fire do you sell remotes on there own

Answer from Meg: Answered on 02/02/2021
Hi Adrian. We do give out replacement remotes if they break. To order yours, please contact customer services on the following link: https://furniture123.co.uk/content/customer-services#contact-us Best wishes, Meg

Question from farah ahmed: Asked on 29/12/2020 hi do the logs glow when the fire is on?

Answer from Meg: Answered on 30/12/2020
Hello - the logs themselves do not glow but the fuel bed and back of the fire does, creating an illusion of an warm glowing fire, just like the real thing. I hope this helps - Best wishes, Meg

Question from Shirajul: Asked on 15/11/2020 Hi, how long is guarantee and warranty

Answer from MegR: Answered on 17/11/2020
Hi Shirajul. All of our products come with a full manufacturer's warranty. These vary in length but are for a minimum of one year. Further details on manufacturer's warranties will generally be attached when you get your new furniture. Best wishes, Meg

Question from Malcolm Garner: Asked on 13/11/2020 Where can I get a replacement remote for this fire

Answer from MeganR: Answered on 17/11/2020
Hey Malcolm. We do stock some replacement remotes. Please contact Customer Services who can arrange this for you (https://furniture123.co.uk/content/customer-services#contact-us). Thanks, Meg

Question from Roy: Asked on 31/10/2020 Is it possible to get an image of the wall mounting as we would like to be able to remove the fire each summer as we have a small feature alcove behind where we would install the fire place and want to know if it can be disguised sufficiently to not be obtrusive.

Answer from MeganR: Answered on 03/11/2020
Hi Roy,

The wall is mounted by a long thin flat bracket which sits behind the fire, which is fixed into the wall with 6 screws & wall plugs. The bracket fits flat to the wall and the fire is lifted onto it to install. This should not be too obtrusive as it does not stick out of the wall. Best wishes, Meg

Question from Toni: Asked on 27/10/2020 Hi is this fire fully electric just a matter of plugging it in to the mains ?? also forgive my ignorance but What does pebble fuel bed mean..

Answer from MeganRobinson: Answered on 02/11/2020
Hi Toni. That's right! Just plug it in and you are good to go! The fire comes with logs, pebbles and crystals to decorate the fuel bed. The fuel bed is the shelf-like area where the logs/pebbles/crystals sit on the fire, so when it refers to a pebble fuel bed it is just referring to the decorative section. I hope this helps. Best wishes, Meg

Question from Ben: Asked on 27/10/2020 Hi, is this suitable for wall mount on a plasterboard?

Answer from MeganR: Answered on 27/10/2020
Hi Ben,

Thanks for your question. The bracket and wall plugs supplied with the product are for a solid wall and the product weighs 21.8kg. There is nothing in the instruction manual that states you cannot attach it to plaster board, but this would be at your own risk and you would need to purchase additional wall plugs/fittings.

I hope this helps!

Best wishes, Meg

Question from Natalie: Asked on 24/10/2020 Hi I wondered if the back of the fireplace /wood part was hollow at all? We have trunking already for the TV and wondering how we would attach it flush to the wall?

Answer from MeganR: Answered on 27/10/2020
Hi Natalie,

The back of the fire is flat, there is no hollow area at the back of the fire. It is designed to fit flush against a flat solid wall.

I hope this helps. Best wishes, Meg

Question from Angela: Asked on 20/10/2020 Can thus be wired into an electric spur sure that without using plug

Answer from MeganR: Answered on 27/10/2020
Hi Angela,

The product comes with a BS1363 3 pin plug fitted with a 13 Amp fuse. The product must be earthed and the mains supply must be safely routed from the heater to an electrical socket.

I hope this helps.
Best wishes,
Meg

Question from Charlie: Asked on 09/02/2020 Are the pebbles stuck down or loose?

Answer from Shuaib: Answered on 10/02/2020
Hi, the pebbles are loose and can be moved around. I hope this helps, please let me know if you have any other questions.

Many Thanks

Shuaib

Question from Lynda: Asked on 12/08/2019 Hi,
Is the fire a plug in

Answer from Rachel: Answered on 13/08/2019
Hi, yes this fire only requires fixing to the wall and plugging in to the mains. I hope this helps. Kind regards,

Question from Gnei F Iqbal Clifford: Asked on 16/07/2019 Hi is the back hollow or is there some space to wall mount it over electric outlet/plug point?

Answer from Rachel: Answered on 17/07/2019
Hi, this fire is designed to fit flush against the wall and is not hollow at the back. In addition, we would strongly not advise mounting it directly over the electric outlet/plug socket. The socket must always be accessible in order to disconnect the fire from the electrical supply for safety and maintenance purposes. I hope this helps. Kind regards,

Question from Dan: Asked on 18/06/2019 Hi is it safe to mount a tv above this fire

Answer from Rachel: Answered on 19/06/2019
Hi, yes it is suitable to mount a TV above this fireplace. I hope this helps. Kind regards,

Question from mt: Asked on 20/03/2019 Hi, I know you can have flame effect without heat, but can you also have flame effect on with no lights on at the side. Or, when you put the flame effect on are the lights always on too.
Regards

Answer from Rachel: Answered on 20/03/2019
Hi, I can advise that the downlights at the side operate independently from the fire/flame effect and is controlled by the remote control supplied. They can be switched on/off without affecting the flame or heat function. I hope this helps. Kind regards, Rachel

Question from peggy: Asked on 06/03/2019 could you please tell me where exactly the heat comes out is it from underneath the fire or underneath the top white panel thank you

Answer from Rachel: Answered on 07/03/2019
Hi, the heat is distributed from the vents underneath the top white panel. I hope this helps. Kind regards,

Question from Helen: Asked on 25/02/2019 Hi can you advise if the colour is brilliant white or a soft white. Do you deliver to Scotland

Answer from Rachel: Answered on 26/02/2019
Hi, I can confirm that the wooden surround is finished in a pure white. In addition, yes we offer delivery all over the UK and Ireland. You can find out more information on our delivery service here: https://furniture123.co.uk/content/delivery-information I hope this helps. Kind regards, Rachel

Question from peter moran: Asked on 23/02/2019 does it come made up or is it a flat pack

Answer from Rachel: Answered on 25/02/2019
Hi, this fireplace will arrive fully assembled. I hope this helps. Kind regards, Rachel

Question from Helen: Asked on 03/02/2019 Hi is there a light under the fuel bed where the pebbles sit and could I add some imitation coal to the logs Regards

Answer from Rachel: Answered on 04/02/2019
Hi, yes this fire uses LED lighting under the log bed. The logs can be adjusted/removed so you may add fake coals if you wish. I hope this helps. Kind regards,

Question from Phil: Asked on 29/01/2019 Hi, what is the length of the power lead from plug to appliance? Thanks

Answer from Rachel: Answered on 30/01/2019
Hi, the length of the power cable for this fire is 1.3M. I hope this helps. Kind regards, Rachel

Question from George: Asked on 28/01/2019 DOES THE FLEX COME OUT FROM BACK OF FIRE OR SIDES/BOTTOM

Answer from Rachel: Answered on 31/01/2019
Hi, if you were to look at the fire from the front, the power cable exits the fire from the bottom right at the back. I hope this helps. Kind regards,

Question from Pat Edmunds: Asked on 26/01/2019 Hi
can you have just the flame effect on and if so do you hear a fan noise or is it silent?

Answer from Rachel: Answered on 28/01/2019
Hi, I can confirm that this fire can be used with the flame effect only (i.e. no heat output) and this is silent running. I hope this helps. Kind regards, Rachel

Question from Jill: Asked on 24/01/2019 Does this fire have a glass screen across the front of it, or is the log bed open like a real fire with the screen behind it?

Answer from Rachel: Answered on 24/01/2019
Hi, this fire has an open log bed. I hope this helps. Kind regards, Rachel

Question from Danny: Asked on 23/01/2019 Hi is there a setting for just flame effect and lights with no heating being emmited from fireplace ? Thanks

Answer from Rachel: Answered on 23/01/2019
Hi, yes this is possible. The flame/LED lights can be used without the heat. I hope this helps. Kind regards, Rachel

Question from Alison: Asked on 21/01/2019 Can the fire be used without the heat option so you can just have the flames on

Answer from Rachel: Answered on 23/01/2019
Hi, yes this fire can be used without the heat and just the flame/light effect only. I hope this helps. Kind regards, Rachel

Question from ..: Asked on 09/01/2019 Hi what size is the actual flame screen height and width please.

Answer from Rachel: Answered on 10/01/2019
Hi, the middle section has dimensions W108 x H30 cm. I hope this helps. Kind regards, Rachel

Question from Vicky: Asked on 08/01/2019 What colour background is included behind the flames if it is not black please?
What is the height of the two white panels in comparison to the glass flame height measurement please?

Answer from Rachel: Answered on 09/01/2019
Hi, the back panel is finished in a very dark grey which appears black when the flames are switched on. The height of the white panels are 14cm and the middle section has a height of 30cm. I hope this helps. Kind regards, Rachel

Question from Mohit: Asked on 06/01/2019 Can this be left free standing on the floor or it has to be mounted on the wall?

Answer from Rachel: Answered on 07/01/2019
Hi, this fireplace can sit on the floor. However we would still advise fixing to the wall for stability. I hope this helps. Kind regards, Rachel

Question from leanne: Asked on 21/11/2018 Can this fire be recessed into the wall?

Answer from Rachel: Answered on 21/11/2018
Hi, this fire is only suitable for wall mounting. Wall brackets are supplied for installation. I hope this helps. Kind regards, Rachel

More Amberglo products

See all Amberglo products »

You may also like

Recently viewed


Back to top