We are working with Which? to offer you a great deal. Try Which? for £1 and in return you’ll get £15 off orders over £200 when you shop on Appliances Direct. It's quick, easy, and most importantly, you'll save money.
Product Information
AquaUno Thermostatic Shower Tower Panel
Summary
A stainless steel thermostatic shower panel with separate flow and temperature control with diverting valves for various showering positions of overhead handset and rain effect body jets. Features automatic shutdown should the cold water fail.
View This Product's Installation Instructions
Features
- Height: 1650mm x Width: 150mm x Projection: 450mm
- Manufactured in high quality stainless steel with "anti-finger mark" finish
- Minimum 1.5 bar pressure required
- Thermostatic temperature control
- Separate temperature and flow control
- Automatic shut-down should the cold water fail
- Diverting valves for various showering combinations for overhead, handset and 2 rain effect body jets
Back to top
Question from Paul diggins: Asked on 20/08/2018 Is product ok to use in a p shaped bath I.e does it spray out far enough
Question from Caroline Badger: Asked on 24/05/2018 Do you know what the min/max flow rates are for this product? Many thanks.
Answer from glenn hello mini um is 1.5 barr and max is 3 barr if you do need to order or need any help please contact us.
Question from Drew : Asked on 25/03/2018 Can it be mounted in the corner
Answer from chris Hi,
No this cant be mounted in a corner
Question from Tony Mears : Asked on 28/05/2017 What is the minimum flow rate required to operate the aquauno shower tower panel? Please
Answer from Nathan McGregor Hello.
thank you for your question.
The terms and conditions are on the website for all out items please click the link here: http://www.betterbathrooms.com/guarantee/.
Question from Sen: Asked on 05/12/2016 How much water does this use per minute?
Answer from chris thomas Hi,
Thank you for your question.
it all depends on your water pressure
If you need any more info or wish to place an order please contact us.
Question from jeffrey: Asked on 12/03/2016 Is the aquauno code 6138 the very shiny one.. Because it's the shiny mirrored effect I want. Am a bit confused by one of the answers above.
Answer from Matt Clarke Hi,
Thank you for your question.
please call us as your question doesn't make sense
If you need any more info or would like to place an order, please contact us.
Question from Puskar Mahendra: Asked on 15/01/2016 I judt had a aquaduo panel fited with 2 bar pump.
After 2 people have shower the water not cold enough while everywhere else the water is very hot. What is the reason.and I have to wait nearly 1h and 30 min to get hot water.and after 2showers starting to get cold
Answer from Simon Hi,
If you contact our aftersales team/technical team on 01925 544 861 they will be able to assist you with this
Question from Raj : Asked on 07/01/2016 What height should the panel be fitted from shower tray to bottom of panel?
Answer from Benjamin Linnert Good afternoon,
Thank you for your question.
You can set this panel as low or as high up your wall as youd like within reason. Id always recommend the panel be at least 50mm off of the tray however. But that is just an aesthetic opinion.
If there is anything further you would like to discuss, including particular delivery dates, feel free to give us a call.
Question from Chris wood: Asked on 13/11/2015 Does this have to be sat in the wall or can you sink it into the wall leaving the face flush with tiles?
Answer from Matt Clarke Hi,
Thank you for your question.
I you wished to you could sink the product into the wall.
If you need any more info or would like to place an order, please contact us.
Question from Sonia: Asked on 24/06/2015 Can I use this product above shower bath thank you
Answer from Matt Clarke Hi,
It would depend on how closed off the area is as there will be a lot of spray when using the front jets. Officially I would say no but in some circumstances you could. For more info please call us on 0161 667 6560.
Regards
Question from Suzie: Asked on 10/06/2015 Would this shower panel be a good fit for an 800x800 quadrant space wise?
Answer from Peter Hi thanks for your question, this is one of the smaller shower panels that we do, however it will still look fairly big in a 800 x 800 quadrant enclosure.
Question from lee: Asked on 19/04/2015 hi do i need a pump to run this shower or can it be plumbed straight to the boiler ( hot and cold pipes) ?
Answer from Simon Kirby Hi this shower panel can be plumbed straight into the hot and cold, however if you have a gravity fed system as appose to a combi system then you may need a shower pump.
Question from Andrew George: Asked on 28/03/2015 We currently have a hot water immersion tank with no gravity feed, cold water is supplied direct. Can this panel be run off of this water system?
Answer from Anthony Hi there,
Thank you for your question.
The shower panel requires a minimum 1.5 bar of pressure to function from a hot and cold water feed.
You would need to speak to a qualified plumber to determine whether you have this minimum pressure for the shower panel to function.
Kind Regards
Question from Heather Holland: Asked on 18/02/2015 Hello,
Can you run the jets and overhead simultaneously or do they only operate separately? Thanks
Answer from Matt Clarke Hi,
Yes these can be operated simultaneously however your pressure will be significantly reduced.
Regards
Question from Lee: Asked on 04/11/2014 Hi, do I need a electric supply into this shower for it to work?
Answer from Jamie H Hi,
Thank you for your question the only thing you need is a hot and cold water feed if you have any urthr questions please feel free to give us a call on 0161 667 6560.
Question from Mike: Asked on 27/10/2014 what is the maximum flow rate of the shower in litres per minute? I need to know this to decide if my combi boiler can achieve the most from it as it can only provide 12 litres per minute. Working pressure in bar is greater than 1.5 Bar but flow rate is different.
Answer from Matt Clarke Hi, you would need to contact our tech team on this matter. Please call 0844 484 7678 and select option 2
Question from Lee: Asked on 07/10/2014 Hi, does this shower require a pump to enable it to perform at its best?
Answer from jonathan hi thank you for your question, no this doesn't need a shower to perform to its best but it does depend on what boiler you have if you have a gravity fed system I would recommend you get a pump as the pressure may not be sufficient for the shower. I hope this information helps but if you do require any further help please contact Better Bathrooms on 0844 484 7678
Question from Alan: Asked on 16/06/2014 Can you fit this shower unit in a corner?
We have a 900 quadrant enclosure and would like to fit a shower panel in the corner, is this possible with this unit?
Answer from Nathan McGregor Hello.
I would not advise putting this item in the corner.
Regards.
Question from richie: Asked on 26/02/2014 do i put just a cold and hot feed to it or do you have to tee off for seperate jets?
Question from Tina: Asked on 14/02/2014 whats the difference between the UNO and DUO
Answer from Peter Hello.
One is brushed steel and the other gloss chrome.
Regards.
Question from John: Asked on 06/02/2014 The shower head on the aquaduo appears to be at a different angle to that of the aquauno.
Please advise?
Thanks,
John
Question from D Hawker: Asked on 04/02/2014 What is the depth of the main panel with and without the taps head? I want to know if it leaves enough room in a 900 quadrant.
Answer from Peter Hi,
Thank you for your question. Yes this panel is fine in a 900mm quadrant. We even have that combination in our display in Manchester.
Question from Samantha starkie: Asked on 08/01/2014 Can you tell me what the guarantee is please.
Answer from Peter Hello and thank you for your question.
We give you a one year warranty with this item.
Regards.
Question from Jack Garrett-Jones: Asked on 06/05/2013
Hi, What's the difference between aquauno and aquaduo showers?
Answer from Lee
Hi there
The difference between the the aqua uno is a brushed steel finish and the aqua duo has a polished chrome finish.
Question from Mrs joyce: Asked on 08/04/2013
Hi, I currently have a electric power shower as I don't have a combi boiler, we want to change to one of these shower panels, can we have 1 with a condensing boiler or would we need to get a combi boiler fitted first?
Answer from Pete
Hi
Thanks for your question. You would need to get a combination boiler fitted first.
Question from Brian: Asked on 19/03/2012 Hi, I'm trying to work out if this is an electric power shower or if I would need to run it from the existing hot water supply.
If I need to run this from an existing supply is it ok running from a combi boiler.
Thanks for the help.
PS I'm hoping this or a very similar product is electric and pumped.
Answer from Mike B Hi there,
This shower runs off the boiler and requires a minimum pressure of 1.5 bar. It would be suitable to run off a Combi Boiler.
Question from Louis: Asked on 12/03/2012 Can I add a seperate shower head to this product?
Answer from Kirk Thompson You cannot add another shower head to this product.
Question from cnellist: Asked on 03/01/2012 what is a rain effect spray
Answer from probertshaw The rain effect refers to the type of spray the body jets provide. for example waterfall is a high volume flowing action and rain effect is a thinner spray