Congratulations! Your promo code PROMOCODE will be automatically applied when you check out – enjoy.
- Energy rating:
- Noise level:
- Extraction or
Dimensions: H 64 x W 70 x D 50 cm
Compliment your kitchen with the CDA ECN72SS chimney cooker hood, combining sleek flat glass and stainless steel. Ready for either extraction or recirculation the CDA ECN72SS is available to all kitchen types. Extracting at a rate of 391m³/hr this hood is suitable for small to medium sized kitchens.
If you are fitting the hood above an electric hob the recommended clearance height is 60cm and for a gas hob the clearance height needs to be 70cm.
This hood can also be installed to recirculate the kitchen air, this is an ideal choice for those who are unable to vent out such as those living in flats. For recirculation you will need to use a charcoal filter which will need to be purchased separately.
If you choose to install this hood to extract the steam and odours from your kitchen you will need to purchase a ducting kit (not included) the outlet diameter required is 150mm with a 120mm reducer.
The front fascia of the hood features five easy to use push buttons to control the speeds of the extraction and also the two halogen lights. It is recommended that you turn the hood on before you begin cooking to get the air moving, ready for a more efficient extraction.
With two 20W halogen lights your workspace is lit up and clear, making it easy for you to keep an eye on your culinary creations. If you also dine in your kitchen the hood lights also provide a nice ambiance.
Extracting at a noise level of 60dB this hood isn't too obtrusive and when set to the lowest speed it won't be too much of a distraction if you also dine in your kitchen.
- Ducted or re-circulating installation
- 3 speeds
- Push button control
- Dishwashable aluminium grease filter
- 2 x 2 W LED lights
- Push button control
- Required height over gas hob: 700mm
- Required height over electric hob: 600mm
- Noise level: 60 dBA
- Extraction rate: 391 m³/hr
- Rated electrical power: 100 W
- Power supply required: 3 amps
N.B. 1 charcoal filter required if re-circulating