For more information about this tray, please see our dimensions and specifications section.
- 30mm height provides level access to the showering area.
-
Rectangular shower tray with linear end drain.
-
Wet room shower tray that can be tiled to your design.
-
Suitable for both timber and screed floors.
-
All shower trays require an installation kit (sold separately).
‘Wet room screens should be cleaned using hot soapy water only’
You’ll need a shower enclosure and a shower to go along with your shower tray. Compatible enclosures and showers are listed on the product page alongside your chosen shower tray, alternatively you can browse our full ranges.
Question from Mark Chamberlain: Asked on 25/07/2022 Can i cut the tray to length?
Hi, thankyou for your question. This tray can be cut, but it depends on the amount that needs to be cut off and the drain type. With is being an end drain you will only be able to cut it from the bottom end, Also, not to exceed 75mm (cutting from the opposite side to the drain) as this will compromise the falls built in. I hope this helps.