Clean air, quiet comfort, all year round
The Carrier CYRA 9000 BTU (CYRA9K) is a smart wall-mounted split system that cools in summer and heats in winter from one sleek indoor unit. Its 3D DC Inverter delivers A++ cooling efficiency, and its heat pump keeps working down to -20°C outside.
Built-in Wi-Fi lets you control and schedule it from your phone. Triple-action filtration, an ionizer and a self-cleaning cycle keep the air fresher, while Wind Avoid Me keeps draughts off you.
Intelligent Cooling & Heating: Whether it's a July heatwave or a frosty January morning, CYRA adapts its output to the room. Gear, ECO and Sleep settings trim running costs, and Follow Me reads the temperature at the remote, so comfort is measured where you are sitting.
The details
Fast and powerful cooling & heating: Stay comfortable all year round, no matter the weather. The 3D DC Inverter varies its speed to match demand, cooling quickly in summer and heating reliably in winter — even when it’s -20°C outside. Turbo mode gives an extra boost when you need the room comfortable fast.
Control your energy use: Gear mode lets you choose 50%, 75% or 100% output to suit how much cooling or heating you actually need. ECO and Sleep modes trim consumption further, and standby draw is just 1 W.
Control from anywhere with Wi-Fi: Built-in Wi-Fi connects CYRA to your home network. Switch it on, change modes and set schedules from your smartphone, at home or away — so you come home to a room that’s already the right temperature.
Cleaner, fresher air: Silver ion, active carbon and cold catalyst filters work with an ionizer to help reduce dust, odours and fine particles. A filter reminder tells you when it’s time to clean them.
Self-cleaning for a fresher unit: After use, the Active Clean cycle uses steam to help lift dirt from the indoor coil, then dries it out — helping prevent mould and musty odours and cutting routine maintenance.
Draught-free comfort: Wind Avoid Me directs air away from you, so you feel the temperature, not the draught. 3D airflow moves the louvres up, down and side to side to spread air evenly and avoid hot and cold spots.
Comfort where you are: Follow Me uses a sensor in the remote control to read the temperature where you’re sitting, so CYRA adjusts to you rather than to the wall it hangs on.
Built-in heat pump, all year round: With an A++ cooling rating (SEER 7.0) and A+ heating (SCOP 4.1, average climate), CYRA keeps your home comfortable in every season while keeping running costs low.
Ultra-quiet operation: Silent mode takes the indoor unit down to just 20.5 dB(A) — quiet enough for bedrooms and home offices.
Frost protection and peace of mind: 8°C heating mode keeps an empty room or holiday home above freezing. Refrigerant leak detection, self-diagnosis, auto restart, voltage protection from 168 V to 264 V and an anti-corrosion coated control board help it last.
Eco-friendly efficiency: R32 refrigerant has around a third of the global warming potential of older R410A and transfers heat efficiently. With A++ cooling and A+ heating ratings, CYRA keeps your home comfortable using less energy.
Why buy me - CYRA9K
- 3D DC Inverter: Fast, efficient cooling and heating that holds your set temperature smoothly, all year round.
- Heats down to -20°C: The built-in heat pump keeps heating through the coldest UK winter days.
- Wi-Fi Active: Control and schedule your air con from your smartphone, wherever you are.
- Gear mode: Cap power at 50%, 75% or 100% to save energy when you don't need full output.
- Wind Avoid Me: Steers airflow away from you for draught-free comfort.
- Triple-action filtration: Silver ion, active carbon and cold catalyst filters plus an ionizer help reduce dust and odours.
- Efficient heating & cooling: A++ cooling (SEER 7.0) and A+ heating (SCOP 4.1) ratings for lower running costs.
- Ultra-quiet operation: Noise levels as low as 20.5 dB(A) in silent mode.
- Low ambient temperature operation for heating: -20°C
Essential info
- Power Supply: 220-240V~ 50Hz, 1Ph
- Indoor Dimensions (W×D×H) (CM): 72.3 × 19.9 × 28.6
- Indoor Net Weight: 7.0kg
- Outdoor Dimensions (W×D×H) (CM): 72.0 × 27.0 × 49.5
- Outdoor Net Weight: 20.4kg
Specification
- Cooling Capacity: 2.6kW (8,871 BTU/h)
- Heating Capacity: 2.93kW (9,997 BTU/h)
- SEER: 7.0 (A++)
- SCOP: Average 4.1 (A+)
- Refrigerant Type: R32
- Refrigerant Charge: 0.46 kg
- Liquid Pipe Diameter: Φ6.35 (1/4″)
- Gas Pipe Diameter: Φ9.52 (3/8″)
- Sound Pressure Indoor (H/M/L/Silent): 38.5 / 34.5 / 24.5 / 20.5 dB(A)
- Energy Class (Cooling / Heating): A++ / A+
- Wi-Fi: Built-in (Wi-Fi Active)
- Standby Power: 1W
More info
- 3D DC Inverter compressor
- Cooling, heating, dehumidifying (Dry) and fan modes
- Heat pump heating down to -20°C outdoors
- Built-in Wi-Fi (Wi-Fi Active)
- Gear mode: 50% / 75% / 100%
- ECO, Turbo, Sleep and Follow Me modes
- Wind Avoid Me and 3D airflow
- Silver ion, active carbon and cold catalyst filters plus ionizer
- Active Clean self-cleaning
- 8°C frost-protection heating
- Filter reminder
- Refrigerant leak detection
- Self-diagnosis and auto restart
- 1 W standby
- Dry-contact input for window switches or building controls
- Comfort Hotel Manager temperature-range lock
- Anti-corrosion coated control board
What's in the Box
- 1 × Carrier CYRA 9000 BTU Indoor Unit
- 1 × Carrier CYRA 9000 BTU Outdoor Unit
- 1 × Remote Control
F-Gas Installation Required. To ensure safe and optimal performance, this unit must be installed by a fully qualified F-Gas AC engineer. These units contain a regulated gas which must be handled by certified personnel in accordance with F-Gas regulations. Please ensure your fitter reads the user manual in full prior to installation.
Accessories options: Our 1/4″ & 3/8″ pipe kits (PIPEKIT12K-5M, PIPEKIT12K-10M and PIPEKIT12KM-15M), wall brackets (ACWALLBKT, ACWALLBKTG, ACWALLBKTLP and ACWALLBKTLPG) and PVC / rubber feet (ACBFS450P, ACBFS450PB and ACBFS600AR) are available separately to provide a matched and ready-to-install solution where required. The pipe kits are factory-manufactured and tested for correct fit and performance, while the wall brackets and rubber feet are designed to provide secure, stable support for your air conditioning unit. Installers can select the most suitable accessories for their individual installation requirements, and may also supply their own pipework depending on preference.
