Product Information
This innovative venting hob from electriQ offers two cooking solutions in one appliance saving you space in your kitchen. The 4-zone induction hob gives you plenty of space to cook any meal, and the powerful extractor quickly clears unwanted odours during and after cooking. With induction technology, the hob will heat your pan directly meaning you won't waste any heat when cooking, and with the A+ energy rating on the extractor, there is no doubt this hob will keep your running costs low.
Each cooking zone has 9 heat levels to choose from, and a powerful boost function should you need to boil water quickly. With the built-in timer, you will never overcook your food, and the auto shutdown and residual heat indicators add a layer of extra safety to your cooking, just in case you have little chefs helping you in the kitchen.
For ease of installation, we’ve included the necessary ducting and grease filters, needed for recirculating the extracted air, in the box. We’ve also included a special function that will help purify the air as it recirculates back into your kitchen.
The sleek black design will suit any kitchen, and the smooth finish and simple touch controls make your hob easy to clean. We suggest trying to avoid spilling water and food into the central extractor, but if you do there is an easy-to-use plug underneath the hob that can be removed to clear any accidental spills.
More Info
- Number of zones: 4
- Hob type: Induction
- Extraction fan speeds: 4 plus boost
- Maximum extraction rate: 500m³h
- Maximum noise level: 70db
- Controls: touch control
- Dimensions: H245mm x W590mm x D520mm
- Cut out dimensions: W560mm x D 490mm
- Hardwiring required
- Supply Voltage:220-240V – 50/60Hz
More Info
- Can be installed to recirculate or extract the air
- Unbranded design coordinates with any kitchen appliance
- Grease Filter: eiQGFAA6080INDD included
- Carbon Filter: eiQCFAA6080INDD sold separately (required for recirculation mode)
Question from Liam: Asked on 15/10/2025 What are the dimensions of the ducting? Is this designed to be contained within the unit?
Hi,The electriQ EIQ60INDDA1 is a 60cm induction hob with a built-in downdraft extractor, designed to fit a standard 560mm × 490mm cut-out in a 60cm worktop. It supports both ducted extraction and recirculating ventilation (carbon filter sold separately).Thanks!
Hi,The electriQ EIQ60INDDA1 is a 60cm induction hob with a built-in downdraft extractor, designed to fit a standard 560mm × 490mm cut-out in a 60cm worktop. It supports both ducted extraction and recirculating ventilation (carbon filter sold separately).Thanks!
Question from Danny: Asked on 15/10/2025 Can an oven sit in housing beneath this hob? Or does the hob take up too much space below the countertop?
Hi,Yes—you can usually install an oven beneath this electriQ induction hob, but you need to ensure there’s enough clearance for safety and ventilation. Induction hobs typically require a minimum of about 50?mm between the bottom of the hob and any oven or combustible surface. Check the installation manuals for both the hob and the oven to confirm that the combined height and clearance fit safely under your countertop.Thanks!
Hi,Yes—you can usually install an oven beneath this electriQ induction hob, but you need to ensure there’s enough clearance for safety and ventilation. Induction hobs typically require a minimum of about 50?mm between the bottom of the hob and any oven or combustible surface. Check the installation manuals for both the hob and the oven to confirm that the combined height and clearance fit safely under your countertop.Thanks!
Question from Vicky: Asked on 09/10/2025 Dose hob have to conect to extract outlet or can it be done with filter only
Hi Vicky, this induction hob can be used with a recirculation filter instead of being connected to an external venting outlet. This flexibility allows you to choose between recirculating the air back into the kitchen or venting it outside, depending on your kitchen's setup and preferences. Please note that for the recirculation mode, you will need to purchase the carbon filter eiQCFAA6080INDD separately. Thank you.
Question from Barbara: Asked on 05/10/2025 Electric 60cm venting induction hob.
SKU E1Q60INDDA1
Will this fit on a 60cm worktop
Hi Barbara, yes, this model is designed to fit standard 60cm worktops. Please take note that it requires a 560 mm cutout width and 490 mm cutout depth. Thank you.
Question from Fran: Asked on 26/09/2025 what size cabinet does this product need to fit in?
Hi Fran,Proper installation of the electriQ EI60INDDA1 induction hob requires a countertop cut-out of 56 cm (W)×49 cm (D), verification that the 52 cm depth fits your cabinet, hardwiring by an electrician, and ensuring adequate clearance for the built-in extractor's ventilation.Thanks!