High-quality, contemporary design
This electriQ hood has a contemporary look, made from quality stainless steel with a satin finish, which is unbranded to coordinate perfectly with all your other appliances, effectively removing odours and vapours from the kitchen.
3 Speed settings
Both the extraction speed and the LED lighting are controlled by the buttons on the front of the hood. There are three speed settings enabling you to select a speed to suit what's cooking. The more odours and vapours, the higher the extraction speed.
Efficient filtration
Fitted with an aluminium grease filter to effectively remove grease from the air. All electriQ cooker hoods have easy-to-clean, dishwasher-safe grease filters already included. We would recommend that these be replaced annually. If you are unable to vent the air out externally, the hood can be operated in recirculating air mode, using the optional carbon filter pack, which will take away any odours. The carbon filter pack needs to be purchased separately. With this electriQ hood, you have the option to extract or recirculate the air. If you are unsure which you should go for, here is a simple guide to both;
Extracting air
- Odours, grease, smoke & steam are extracted
- Air is extracted via ducting to the outside of your house
- This requires a vent through an outside wall
Recirculating air
- Odours, grease & smoke are drawn through a series of filters
- The purified air is then released back into the kitchen
- This method can be used in all kitchen types and eliminates the need for ducting
- With this method, you will need a carbon filter pack (eiQMIDCAR90CHIM)
- The carbon filter pack needs to be replaced every 3-6 months
Features:
- Contemporary wall-mounted slimline chimney design
- Unbranded to coordinate with existing appliances
- Maximum extraction rate: 400m³/h
- The LED light gives clear visibility of the cooking space
- Easy-to-use push button controls with 3 speeds
- Maximum extraction noise - 67db
- Aluminium dishwasher-safe grease filter
- Air outlet 150mm with 120/150mm adaptor
- Dimensions: H 460-800 x W 598 x D 450mm
- Energy rating - B
- 115W Motor
What's in the box?
- Slimline hood
- 2x Aluminium dishwasher-safe grease filters
Question from Jan: Asked on 10/12/2025 Hi I was wondering where the duct outlet is on this chimney extractor as It does not show on the illustration
Kind regards
Janice Sp
Hi, The duct outlet on the electriQ 60cm Slimline Chimney Hood (eiQ60SLIMBK) is located at the top of the hood, under the chimney cover. It is not visible on the front illustration because it is hidden by the chimney section. For external extraction, the ducting connects to this top outlet (150?mm diameter), and the chimney slides over it to conceal the pipe. If the hood is set up for recirculation, no external ducting is needed, and the filtered air is released through vents in the chimney.
Thank you.
Question from Peter: Asked on 25/11/2025 can this unit take 120mm diameter duct
Hi, The electriQ 60?cm Slimline Chimney Hood (eiQ60SLIMBK) has a standard 150?mm air outlet, but it comes with a 120?mm to 150?mm adaptor, allowing it to be connected to 120?mm ducting if required.
Thank you.
Question from Chimney hood eiQ60SLIMBK: Asked on 16/11/2025 What size carbon filters are used with this appliance.
Hi, it uses a carbon filter with a diameter of 115 mm. You may view the recommended carbon filter at this link: https://www.appliancesdirect.co.uk/p/eiqmidcar90chim/electriq-eiqmidcar90chim-carbon-filter. Thank you.
Question from Christine Sharp: Asked on 14/11/2025 Does the extractor come with internal filters?
Hi, The electriQ 60?cm Slimline Chimney Hood (model?eiQ60SLIMBK) comes with aluminium grease filters included.
Thank you.
Question from Oleh Zahajkevych: Asked on 09/10/2025 Good afternoon, some of your products have option to take out old equipment, with this item it's work the same ?
And if you install as well or we need to do it?
Thank you
Hi,The electriQ EI60SLIMBK 60cm chimney hood does not include an option to remove your old equipment at checkout.
As for installation, a professional service is not offered. The hood is designed for straightforward DIY installation and comes with a plug for easy setup.Thanks!