What stands out
- The spacious design gives you plenty of room to prepare multiple dishes together
- A central wok burner is perfect for stir-fries and searing meats
- Flame failure safety devices cut off the gas if the flame goes out
- Cast iron pan supports give you stability as you cook
- The stylish glass surface and removable pan supports make cleaning easy
The details
This stylish gas-on-glass hob offers style, space and efficiency; everything you'd want for the new addition to your kitchen. Featuring five burners in total, the central wok burner is ideal for searing meats and stir-fries as you prepare sides and sauces on the surrounding burners. All controlled using simple dials at the front of the hob, it's easy to ignite and adjust the flames while removable pan supports and the smooth glass surface make cleaning and maintenance easy.
Essential info
- Dimensions: H 9.7 x W 75 x D 51cm
- Cut-out size: W 56 x D 48cm
- Colour: Black
- Burners: 5
- Ignition: Push to ignite
- Flame failure safety devices: 5
- LPG compatible: Yes
More info
- Easy-clean glass surface
- Removable cast iron pan support
- Front controls with push ignition
- Flame failure safety devices
- Unbranded design
- Triple ring: 3.3kW
- Rapid: 3.0kW
- Semi-rapid: 1.75kW x 2
- Auxiliary: 1kw
- LPG Kit Supplied
Question from Iain Robinson: Asked on 16/04/2026 Is the gas connection for this model in the back right corner, hard to tell.from the photos?
Hi, The gas connection on the electriQ EQGH755BLK gas hob is a single 1/2” threaded inlet located on the underside rear manifold of the appliance. It is not positioned in a fixed corner (such as rear left or rear right). The connection is accessed from inside the cabinet below the hob and is designed to be used with an adjustable elbow fitting supplied with the appliance, which can be oriented during installation to suit the direction of the incoming gas pipework. This allows the installer to route the final connection to the most suitable position within the rear underside space of the unit, depending on the installation setup.
Thank you.
Question from Louise: Asked on 07/04/2026 Where was this manufactured please?
Hi, The electriQ 75cm Gas on Glass 5 Burner Gas Hob (Model: EQGH755BLK) was manufactured in China.
Thank you.
Question from Kve: Asked on 18/02/2026 Current hob is 70cm wide. Can I replace with a 75cm wide one. Not sure what the cut out size is
Hi, The ElectriQ 75?cm gas hob requires a worktop cut-out of about 56?cm × 48?cm. Since your current hob is 70?cm wide, the existing opening may need to be slightly enlarged to fit the new hob. If the worktop is laminate or wood, this is usually straightforward; stone or quartz may need professional cutting. Installation must be carried out by a qualified Gas Safe engineer.
Thank you.