The Series 4 Gas Hob offers precise control, enhanced safety, and easy cleaning with a seamless stainless steel design and dishwasher-safe pan supports, making it a compact and efficient addition to your kitchen.
Precise Adjustments at Your Fingertips
Ergonomic sword dials: with raised center for precise adjustments.
Effortless Cleaning
Stainless steel design: The seamless, one-piece stainless steel design makes cleaning simple.
Enhanced Safety
Safety gas cut-off: ensures safety by instantly cutting off the gas supply if the flame goes out.
Hassle-Free Cleanup
Dishwasher-safe pan supports: Easy, scrub-free cleaning.
Seamless Cooking Surface
Semi-continuous pan supports: smaller for easy cleaning, yet provide a seamless cooking surface.
Compact and Efficient Design
60cm, 4 burners, 2 Dishwasher-suitable cast iron pan supports, new standard sword dials, Front control.
Design
- Stainless steel surface
- Cast iron pan supports
Usage convenience
- Design coordinated control dials, front: easy access dials at the front with a strong grip for effortless turning.
- Ignition via control dials: just push and turn the dials to ignite the flame.
Burners and power
- 4 gas burners
- Left front: standard burner up to 1.75 KW (depending on gas type)
- Left rear: Standard burner up to 1.75 KW (depending on gas type)
- Right rear: high-speed burner up to 3 KW (depending on gas type)
- Right front: economy burner up to 1 KW (depending on gas type)
Cleaning
- Dishwasher suitable pan supports for easy cleaning.
Safety
- Flame failure safety device: prevents unwanted gas flow when the flame goes out.
Installation (gas types & measurements)
- Usable for: NG H/E 20mbar, E+ 20/25mbar
- Liquid gas G30,31 28-30/37mbar
- Pre-set for natural gas
- Nozzle set for LPG jets included.
- Dimensions of the product (HxWxD mm): 51.1 x 582 x 520
- Required niche size for installation (HxWxD mm): 45 x 560 x (480 - 490)
- Min. worktop thickness: 20 mm
- Power cord: 1 m
- Connected load: 7.5 KW
Question from Nafisah: Asked on 23/02/2026 What size is the cut of the insert of the kitchen top to be for this gas hob Bosch series 6
Hi, The Bosch Series 4 60?cm 4-Burner Gas Hob (PGP6B5K90) requires a worktop cut-out of 560?mm wide by 480–490?mm deep, with a minimum worktop thickness of 20?mm. Make sure to follow the manual’s recommended clearances for safe installation.
Thank you.