Oak Media Wall Mounted 3-Sided Electric Fireplace with Logs - 55 inch - AmberGlo

Hi, The AmberGlo AGL085 55" electric fireplace connects to your phone using the Tuya Smart app. The Wi-Fi button is on the top front control panel. To set it up, turn the fireplace on, press and hold the Wi-Fi button until the light flashes, then open the app, add the fireplace, and enter your Wi-Fi password (use 2.4?GHz Wi-Fi). Once connected, you can control the flame, heat, timer, and power from your phone. If the light doesn’t flash, hold the power or flame buttons for 3 seconds to enable Wi-Fi before pairing.

Thank you.

Hi, The installation of the AmberGlo 55-inch electric fireplace usually takes around 30–60 minutes, as the unit comes pre-assembled and only needs mounting onto the wall bracket and plugging into a standard socket.

Thank you.

Hi, The AmberGlo Oak Media 55″ Electric Fireplace (AGL085) can be mounted on a plasterboard wall, but the supplied wall plugs are for solid walls only. For non-solid walls like plasterboard, you must use appropriate heavy-duty fixings or secure into studs/backing so the unit is safely supported. The official manual shows the bracket positions and specifically notes that different fixings may be required for other wall types.

Thank you.

Hi Peter,The Oak Media Wall Mounted 3-Sided Electric Fireplace with Logs – 55 inch – AmberGlo (model AGL085) weighs 48?kg, and its boxed weight, including packaging, is 57?kg.Thanks!

Hi, The fireplace must not be installed directly under a wall socket, and the plug and socket need to remain fully accessible at all times for maintenance, cleaning, and emergency disconnection. The mains cable cannot be routed over or through the socket, or hidden by the unit. For a neat, compliant installation, a recessed wall socket should be installed behind the fireplace, aligned with the cable exit, so the plug is out of sight but still easily accessible.

Thank you.

Hi, The AmberGlo Oak Media Wall Fireplace lets you change the flame colour. It has 10 different colours and colour combinations that you can cycle through using the remote or the button on the unit, plus a top light with 7 colours for extra ambience. This means the flame isn’t fixed—it can be customized to suit your mood or room.

Thank you.

Hi, The AmberGlo AGL085 3-Sided Oak Media Wall Fireplace has its power cable exiting from the back, near the right-hand side. It cannot be routed to the opposite end. For safety and warranty reasons, the socket should be installed to match this factory cable exit.

Thank you.

Hi, For safety, the bottom of the AmberGlo 55-inch fireplace must be at least 30?cm (12 inches) above the floor.

Thank you.

Hi, The AmberGlo 3-Sided Electric Fireplace (AGL085) is designed for wall mounting only. It cannot be placed on a cabinet or furniture, as this could block airflow and cause overheating. For safe use, it must be secured to a wall or built into a media wall.

Thank you.

Hi, Yes, you can mount a TV above the AmberGlo Oak Media Wall fireplace, but you should leave about 20–30?cm (8–12 inches) between the top of the fire and the bottom of the TV to avoid heat damage. Make sure the TV mount doesn’t block the top vent, and if possible, check the wall temperature when the fire is on.

Thank you.

Hi Jane, this fireplace heater uses a fan to distribute heat, which produces a gentle hum while operating. It is designed to be relatively quiet, so it will not be intrusive during normal use, making it suitable for living rooms or bedrooms where a low-noise heater is preferred. Thank you.

Hi Steve, we do not recommend placing your TV recording box directly on top of the fireplace, as the surface can get hot during use. For safety, it is best to mount your TV on the wall above the unit and keep any electronics clear of the heat. Thank you.

Hi Angela,Yes — the AmberGlo Oak Media Wall 3-Sided Electric Fireplace (AGL085) features realistic crackling fire sound effects, and the VOLUME control allows you to adjust or mute these sounds to your preference.Thanks!

Hi Mrs. Debra, this fireplace has a maximum heat output of 1.8 kW (1800 watts). Thank you.

Hi Caitlin, we currently cannot provide additional images of this product. However, please note that it has a natural/light oak-effect finish, not dark oak. It will not exactly match a dark oak colour. Thank you.

Hi,The AmberGlo Oak Media Wall 3-Sided Electric Fireplace (AGL085) is designed exclusively for wall mounting and does not come with a freestanding base. It is intended solely for integration into media wall or fitted chimney breast setups, making it unsuitable for use as a standalone unit against a wall.Thanks!

Hi,The Amberglo AGL085 Oak Media Wall Electric Fireplace is strictly for wall-mounting and does not include a freestanding base; for similar aesthetics, consider Amberglo's discounted freestanding models like the Grey Concrete Effect (AGL036) or the Classic White Suite (AGL033).Thanks!

Hi Ellena,Yes, the fireplace's "Heat Exit Top Inside" design means heat vents upward, making it likely safe to place a TV above it, but you must ensure adequate vertical clearance and that the TV or mounting hardware doesn't obstruct the top heat vent.Thanks!

Hi,The AmberGlo AGL085 Media Wall is a fully assembled, 140 cm-wide wall-mounted unit designed for built-in installation; it is not freestanding and cannot support a TV on top.Thanks!