Stand out features
High Performance Motor
The high performance motor quickly clears the air of cooking odours leaving the kitchen clear while you cook.
Hob2Hood
The Hob2Hood function links the hob and hood to regulate the fan speed automatically when cooking.
Efficient LED Lighting
LED lights provide energy efficient illumination to the hob underneath.
Filter Cleaning Notification
The hood has an indicator that lets you know when the grease filters require cleaning.
The 7000-series Hob2Hood is a highly efficient feature that automatically controls your cooker hood and lights. Regardless of your hob temperature, the fan adjusts while you work, allowing you to fully concentrate on what you are cooking.
The hands-free hood
This cooker hood has Hob2Hood, a useful feature that automatically controls your cooker hood and lights. Leave Hob2Hood to regulate the fan while you concentrate on the key moments involved in getting your dish just right. But if you’d rather adjust the fan speed yourself, there are manual controls on the cooker hood too.
Clean air. Faster
This Cooker hood clears the kitchen from cooking fumes quickly. That is because the advanced cooker hood has an efficient and powerful motor.
LEDlights for more refined cooking
LED lights use far less energy than other lights, with a much longer life expectancy. And they provide expert illumination for greater detail while cooking.
Maximum filtration, again and again
A highly functioning filter that captures and removes fats and odours when cooking. The removable filter can be cleaned in the dishwasher, ensuring that your cooker hood is continually efficient.
Key Features
- Recirculation or ducted extraction
- Hob2Hood automates the cooker hood when installed alongside compatible hobs
- High 580m³/h extraction rate (700m³/hr in intensive mode)
- 3 variable fan speeds plus an intensive booster setting
- Washable aluminium grease filters
- LED lights for lower energy usage and longer life expectancy
Question from Adrian: Asked on 25/01/2026 Can the ducting exit from the side of the unit and if so what is the minimum height of the enclosure that will house it?
Hi Adrian,The AEG 6000 Series 80?cm Canopy Hob2Hood (DGE5861HB) is designed for a top duct outlet only; it does not support a direct side exit. If you need the duct to exit sideways, you must route it from the top outlet using angled or flexible ducting. The hood itself is approximately 331?mm high, so when housing it in a cabinet, ensure there is enough clearance above the unit for ducting and any elbows. A standard wall unit with an internal height of around 720–800?mm is generally sufficient. Additionally, maintain a minimum distance of 500?mm above an electric hob or 570?mm above a gas hob for safe operation.Thanks!
Question from Kam: Asked on 11/01/2026 Hi, would this fit into a 800mm by 300mm wall unit? Thank you
Hi,The AEG 6000 Series 80?cm Canopy Cooker Hood (DGE5861HB) will fit into an 800?mm × 300?mm wall unit. The hood is 770?mm wide, 300?mm deep, and approximately 331?mm high, so it fits comfortably in width and depth, with a little space to spare. Just ensure there’s enough vertical clearance inside the cabinet for installation and proper ventilation, and allow room for ducting if you’re venting outside.Thanks!
Question from Phil: Asked on 18/12/2025 What length integrated hood do I need for a 60cm hob?
Hi, For a 60?cm hob, an 80?cm cooker hood is ideal because it’s wide enough to capture all steam and cooking fumes effectively.
Thank you.