The details
This innovative black glass venting induction hob with four cooking zones gives you plenty of space to cook but also extracts unwanted cooking odours and fumes thanks to the built-in extractor fan in the centre. So, there’s no need for an unsightly, separate cooker hood. There are nine power levels to choose from, a boost mode, so you get an extra burst of heat, plus a built-in timer, which you can set up to 99 minutes, so you can be sure to cook each dish perfectly. Thanks to induction technology, it’ll only activate heating once your pan is in the cooking zone, saving you energy as you cook. Also, the individual residual indicators remain lit until it’s safe to touch, meaning you can soon wipe away any splashes or spillages.
Please note: This product does not include a carbon filter or an internal or external ducting kit - Please see the ‘Recommended Accessories’ tab for additional purchases.
Essential info
- Number of zones: 4
- Hob type: Induction
- Extraction fan speed: 3
- Extraction airflow: 535m³/h
- Colour: Black glass
- Controls: Touch
- Filter included: Yes, grease filter
- Dimensions: H240 x W600 x D520 mm
- Cut-out dimensions: W585 x D500 mm
- Minimum cabinet unit depth: 650mm
- Warranty: 1 year
More info
- Induction hob and extractor fan in one
- 9 heat levels for each zone
- Individual residual heat indicators
- Pan sensors
- Child lock
- Timer: 99 mins
- Auto shut off
- Booster function
- Hardwiring is required
- Cable length: 1.5m power cord without plug
- 220-240V ~ 50/60Hz supply voltage
- 7335W electric power
Question from Shahin: Asked on 03/11/2025 With recirculation, will it fit a standard UK 60cm units? Or will the depth be an issue?
Hi, The electriQ 60?cm Venting Induction Hob (EIQ60INDDF) fits a standard 60?cm wide unit, but the cabinet must be at least 650?mm deep to allow proper installation and ventilation. Standard UK base units may be too shallow, which could prevent correct fitting, even when using recirculation mode.
Thank you.
Question from Arty: Asked on 01/11/2025 Can this be fitted above a built in oven
Hi,The electriQ 60?cm Venting Induction Hob (EIQ60INDDF) can be installed above a built-in oven, but only if the cabinet depth is at least 650?mm and there is sufficient clearance above the oven to allow proper ventilation and heat dissipation, as the hob’s built-in extractor requires space to function safely and effectively.Thanks!
Question from Hayley Murrell: Asked on 28/10/2025 Hello
For fitting do you need the ducting kits or can you just have a filter?
Hi Layley,The electriQ EIQ60INDDF venting induction hob is designed to work with a ducting kit for external extraction, so it can’t be used with just a filter. That said, if external venting isn’t an option in your kitchen, you can still use it with an optional recirculating (carbon) filter kit.Thanks!
Question from Emily: Asked on 03/10/2025 How do you change the carbon filters?
Hi Emily,To replace the carbon filter in your electriQ EIQ60INDDF cooker hood, first ensure the appliance is switched off and unplugged for safety; then, press the locking mechanism to detach the grease filter; once removed, release the old carbon filter using its button or latch; next, align the new carbon filter with the designated slots and secure it; finally, place the grease filter back into position until it securely locks.Thanks!