This telescopic cooker hood from Hotpoint will deliver odour banishing extraction for small to medium kitchens, leaving you with a hygienic and clean kitchen environment. With a smooth and understated design, it will merge beautifully with existing appliances and won't disrupt your kitchen design.
This 60cm telescopic hood is ideal for those who want a hood that blends seamlessly with the kitchen. Telescopic hoods are installed on the underside of a kitchen cabinet unit directly above the hob. It hides away under your kitchen unit when not in use and you then pull the front out to extend the hood to its full length for a large and full coverage of the hood.
Before you order, make sure you measure the dimensions carefully against your available space: Dimensions: Height: 180mm Width: 598mm Depth: 300mm
3 speed extraction power:
Slider Controls can be found on the underside of the hood for easy access control. With 3 Speeds available, you can adjust the extraction power to suit the dish you're cooking and the amount of steam and cooking odours. The hood has a maximum extraction rate of 304 m³/hr, or can recirculate at up to 230 m³/hr.
Suitable for ducted or recirculated extraction:
Some kitchens aren't suitable for ducting out extraction, which is why this-Hotpoint cooker hood provides the option of either ducting or recirculating air.
Subtle and modern design:
With a stainless steel design, this telescopic cooker hood has an understated design that will integrate smoothly with any kitchen.
LED Lighting:
2 x-6 Watt LED-Lights are integrated into the underside of the hood that will illuminate your hob to make it easier when cooking food.
Easy to clean:
This cooker hood has an aluminium grease filter that is super easy to clean. Simply stick it in the dishwasher and you can pop the filter back into the cooker hood knowing that it's thoroughly clean.
Key Features:
- 60cm wide telescopic hood
- 3 speed extraction power
- Up to 304 m³/hr extraction rate
- Suitable for ducted and recirculated extraction
- Dishwasher safe aluminium grease filters
Question from Kerry: Asked on 13/08/2026 Please can you advise when using carbon filters and recirculating mode how do you put it in recirculating mode thank you
Hi, The Hotpoint HSFX does not have a separate button for recirculating mode. To use it in recirculating mode, simply fit the appropriate charcoal filter(s) as shown in the installation instructions; the air is then filtered and returned into the room rather than vented outside. The fan controls remain the same and can be used on any of the three speeds.
Thank you.
Question from Ian5nichol: Asked on 06/08/2026 What are the dimensions of the cut out in the cabinet needed to accommodate the body of the extractor unit. Its a replacement where the cut out is 550 x 280
Hi, We have checked the Hotpoint HSFX installation information, and the required cabinet opening for the extractor body is approximately 550mm wide x 280mm deep. Your existing cut-out of 550 x 280mm should therefore be suitable, provided there is enough internal clearance for the fixing brackets, motor housing and ducting connection. We would recommend checking the installation drawing before fitting to confirm there are no obstructions within the cabinet.
Thank you.
Question from Nili: Asked on 15/02/2026 Can I leave this fully extended at all times or will it automatically start if I extend it
Hi Nili,You can leave the Hotpoint 60?cm telescopic cooker hood fully extended without any problem, as it won’t automatically turn on — the fan and lights only operate when you manually switch them on using the controls.Thanks!