This stylish 90cm Island Hood from electriQ is sleek and slimline, adding a modern touch to your kitchen. With a powerful 376m³/h extraction rate, it quickly removes unwanted cooking odours and steam from the air and is ideal for large-sized kitchens. The A++ energy rating means this hood operates efficiently and helps to keep energy costs low. The simple touch controls allow you to adjust fan speeds easily, and the two LED lights provide bright, energy-efficient lighting for your cooking area. This hood features an automatic function so it can detect the heat coming from your cooking through thermal sensors, and it will automatically adjust itself to the fan speed required. We’ve also included an air cleaning function, which will continue cleaning your air for an hour after you have finished cooking.
Automatic Function
Auto Mode will monitor heat with real-time thermal sensing and automatically adjust the extraction levels to suit what's cooking. This function can be used in standby mode to have the cooker hood activate as soon as you start cooking and then automatically stop again if no heat is detected for 3 minutes.
Air Cleaning Mode
The unit will operate at a low speed for 5 minutes, then power down for 55 minutes. This cycle will repeat each hour until deactivated
Key Features
- Extraction or recirculation options
- 3 fan speed settings with 2 booster settings to clear the air quickly
- Max extraction rate 376m³/h
- Max noise level: 54 dB
- Touch controls
- 2x LED lights
- Aluminium grease filters can be washed and reused
- Air outlet diameter: 150mm
- Dimensions: H 650mm x W 900mm x D 603mm
- Energy rating: A++
More Info
- Extendable chimney section to fit different kitchen heights
- Can be installed to recirculate or extract the air
- Unbranded design coordinates with any kitchen appliance
- Grease Filter: eiQGFA40011 / included (dishwasher-safe at 60°C)
- Carbon filter: eiQCFA20061 (set of 2) sold separately (required for recirculation mode)
Note: Some cooker hoods come with a blue protective film; please remove it before installation.