Accessories options: Our pipe kits (PIPEKIT12K-5M, PIPEKIT12K-10M, PIPEKIT12KM-15M, PIPEI2K25M and PIPEI2K50M), wall brackets (ACWALLBKTSLP and ACWALLBKTSLPG), and PVC / rubber feet (ACBFS450P, ACBFS450PB, ACBFS600AR and ACBFS600ARBase) are available separately to provide a matched and ready-to-install solution where required. The pipe kits are factory-manufactured and tested for correct fit and performance, while the wall brackets and rubber feet are designed to provide secure, stable support for your air conditioning unit. Installers can select the most suitable accessories for their individual installation requirements, and may also supply their own pipework depending on preference.
Smart, Year-Round Climate Control
Meet the Midea Comfee CF-CHR09 – a compact, smart-enabled air conditioner that keeps small rooms comfortable all year round. Designed for spaces up to 25m², this 9,000 BTU heat pump system delivers cooling in the summer and efficient heating when the temperature drops, all controlled from your phone via built-in Wi-Fi.
Powered by a DC inverter compressor, it adjusts its output to the temperature in your room rather than constantly switching on and off. The result is steadier comfort, lower running costs and an A++ cooling / A+ heating energy rating, with cooling, heating and dehumidifying modes to cover every season.
Whisper-Quiet Operation
Running at just 37dB(A) at nominal operation, it is a quiet companion for bedrooms, home offices and studies, so you can sleep, work or relax without a distracting hum.
Hands-On Smart Control
Built-in Wi-Fi means there is no extra adaptor to buy. Download the app, connect, and you can change modes, set timers and adjust the temperature from wherever you are.
Why Buy Me? Discover Key Features
The Midea Comfee CF-CHR09 combines smart control with high-efficiency hardware, keeping you comfortable whilst keeping a firm lid on running costs.
Control from Anywhere
Connect to the app over built-in Wi-Fi to set schedules, switch modes and adjust the temperature from your phone, whether you are on the sofa or on the way home.
Smooth DC Inverter
The DC inverter compressor adjusts its speed to the temperature in the room, cooling or heating quickly and then holding it steady, without the noisy, energy-hungry stop-start cycles of older units.
Cosy Heat Pump Heating
Heat pump technology turns the same unit into an efficient heater for the colder months, giving you year-round comfort from a single system.
Drier, More Comfortable Air
Humid days feel warmer than they are. Dehumidifying mode removes up to 1.0 litres of moisture per hour, helping rooms feel fresher and more comfortable.
Eco Mode & Smart Diagnosis
Eco mode helps trim energy use, while smart diagnosis helps pinpoint any issues quickly, keeping running costs and fuss to a minimum.
Sleep-Friendly Comfort
Whisper-quiet running and automatic temperature adjustment help you drift off and stay comfortable through the night, without waking to a noisy unit.
Downloads
User ManualWhat's in the Box
- Indoor Air Conditioner Unit
- Outdoor Condenser Unit
- Infrared Remote Control
- Indoor Mounting Plate
- User Manuals
Key Specifications
- Cooling Output: 9,000 BTU
- Room Size: Suitable for up to 25m²
- Energy Rating: A++ (Cooling) / A+ (Heating)
- SEER / SCOP: 6.1 / 4.0
- Operating Modes: Cooling, Heating, Dehumidifying
- Refrigerant Type: R32 (GWP 675)
- Piping Diameters: Liquid 1/4" (6.35mm) / Gas 3/8" (9.52mm)
- Max Pipe Run / Elevation: 25m / 10m
- Indoor Sound Level: 37 dB(A) (nominal)
- Power Supply: 220-240V~ 50Hz, 1Ph
- Indoor Dimensions (W×D×H) / Net Weight: 71.5 × 19.4 × 28.5 cm / 6.7kg
- Outdoor Dimensions (W×D×H) / Net Weight: 72 × 27 × 49.5 cm / 21kg
- Smart Connectivity: Built-in Wi-Fi with smartphone app control
- Core Functionality: DC Inverter, 3 Fan Speeds, Eco Mode, Smart Diagnosis, Programmable Timer
- Warranty: 2 years
Installation & Technical Advice
Important: Pipe Kit Required Please note that a standard pipe kit (Liquid 1/4" / Gas 3/8") is essential for installing this unit but is sold separately. Ensure you have the correct size of pipe kit before booking your installation. Designed for standard single-split installations.
F-Gas Installation Required This air conditioning system contains R32 refrigerant, is covered by strict F-Gas regulations, and must be installed and commissioned by an F-Gas certified air conditioning engineer. Handling must only be carried out by appropriately qualified professionals.
Midea Comfee 9000 BTU Smart A++ Wall Mounted Split Air Conditioner with Heat Pump
The Comfee 9,000 BTU is a smart, Wi-Fi–enabled inverter wall split built for genuine year-round use. An inverter rotary compressor pairs A++ cooling efficiency with heat-pump warming for the colder months, while built-in Wi-Fi and app control put the whole system on your phone. Backed by the advanced engineering of the Midea Group – one of the world’s largest appliance manufacturers – it’s a well-specified fixed split air conditioner. Suitable for rooms of roughly up to 25 m², subject to insulation, glazing and orientation.
Why Buy Me
- 9,000 BTU cooling + heat pump – A++ rated cooling for warm spells and efficient heat‑pump warming in winter, so one unit works all year.
- Wi‑Fi & app control built in – adjust temperature, mode and schedules from your smartphone, at home or away; works with voice assistants via the Midea app ecosystem.
- Low‑energy inverter – the DC inverter compressor modulates output continuously instead of cycling on/off, holding temperature while trimming running costs (A++ cooling / A+ heating).
- Quiet in the room – designed for low indoor noise so it stays in the background while you sleep or work.
- Dehumidifier & fan modes – removes excess moisture (helping reduce damp, mould and mildew) and runs as a standalone fan when you don’t need cooling.
- Flexible installation – long pipe run (up to 25 m) and up to 10 m height difference between units give installers real freedom on placement.
- Smart self‑care features – smart diagnosis, eco mode and refrigerant leak detection across the Comfee range help protect the unit and simplify servicing.
- Backed by Midea – dependable spares and service through a global manufacturer.
The Details
Year-round comfort from one system. The inverter compressor delivers fast, stable cooling when it’s hot and switches to efficient heat-pump warming when it’s cold – holding your set temperature rather than swinging above and below it. Rated cooling is 3.4 kW (9,000 BTU) with matched heat-pump heating of around 3.37 kW.
Efficiency that shows on the bill. Rated A++ in cooling and A+ in heating, the unit uses inverter control to match output to demand. Because it ramps down once the room is at temperature – instead of stopping and restarting at full power – it avoids the energy spikes of older on/off units.
Control from anywhere. Built-in Wi-Fi connects the unit to the Midea app so you can set schedules, change modes and check status from your phone – handy for pre-cooling before you get home or making sure it’s off after you’ve left.
Cleaner, more comfortable air. A dedicated dehumidification mode pulls excess moisture out of the room (rated around 1.0 l/h), helping with that heavy, humid feeling on muggy days and reducing the conditions that let mould and mildew form. A fan-only mode keeps air moving when cooling isn’t needed.
Installer-friendly pipework. With a maximum pipe run of 25 m and up to 10 m of height difference between indoor and outdoor units, the Etesio gives installers latitude on where the condenser sits – useful on flats, awkward elevations and longer runs. Connections are 1/4" (6.35 mm) liquid and 3/8" (9.52 mm) gas.
Compact indoor unit. The wall unit measures 715 × 285 × 194 mm (W×H×D) and weighs 6.7 kg, sitting discreetly above a door or window. The outdoor condenser is 720 × 495 × 270 mm and 21 kg.
Essential Info
- Power supply: 220–240 V ~ 50 Hz, 1 Ph (standard for range - confirm on rating plate)
- Indoor dimensions (W×H×D): 715 × 285 × 194 mm
- Indoor net weight: 6.7 kg
- Outdoor dimensions (W×H×D): 720 × 495 × 270 mm
- Outdoor net weight: 21 kg
- Colour: White
Specification
- Cooling capacity (rated): 3.4 kW (9,000 BTU)
- Cooling capacity (min–nom–max): ~0.91 – 2.64 – 3.40 kW (≈3,100–9,000–11,600 BTU)
- Heating capacity (rated): 3.37 kW
- Heating capacity (min–nom–max): ~0.82 – 2.93 – 3.37 kW (≈2,800–10,000–11,500 BTU)
- Energy class (cool / heat): A++ / A+
- SEER (cooling): ~6.1
- SCOP (heating, average climate): ~4.0
- EER / COP (nominal, EN 14511): 3.3 / 3.72
- Pdesign (cooling / heating): ~2.6 kW / ~2.5 kW
- Annual energy (cool / heat avg.): ~147–156 kWh / ~840–910 kWh
- Refrigerant / GWP: R32 / 675
- Factory pre-charge: ~0.80 kg
- Dehumidification: ~1.0 l/h
- Compressor: Rotary DC inverter
- Indoor airflow (min–med–max): ~3.8 – 5.3 – 7.2 m³/min
- Indoor sound pressure: 37 dB(A) (cooling & heating, nominal)
- Indoor sound power: ~52–53 dB(A)
- Pipe - liquid / gas: 6.35 mm (1/4") / 9.52 mm (3/8")
- Max pipe run / max elevation: 25 m / 10 m
- Operating range (cooling, outdoor): ~ −15 to +50 °C
- Power supply: 220–240 V ~ 50 Hz, 1 Ph
- Remote control: Included
- Smart / connectivity: Wi-Fi built-in, app control, smart diagnosis, eco mode, leak detection
- Colour: White
- Warranty: 2-Year
Installation
F-Gas: This unit contains R32 refrigerant and must be installed and commissioned by an F-Gas certified engineer. Pipe kits are available separately or the installer supplies pipework, cabling and drainage to site.
n-box contents: Indoor wall unit, outdoor condenser, wall-mounting plate, infrared remote control and user manuals.
Not included: Copper pipework, interconnect cables, condensate drainage and mounting brackets.
Downloads
