Appliances Direct
Laptops Direct
Drones Direct
Better Bathrooms
Furniture 123
Dehumidifiers
Outdoor Living
Aircon
My Account

Track order Trade enquiries Public Sector enquiries
Inc. VAT vat switch show inc Ex. VAT Inc. VAT vat switch show ex Ex. VAT
£ currency switch £ currency switch

Elica NikolaTesla Fit 72cm Venting Induction Hob with Built-In Extraction

SKU: NT-FIT-70 Quickfind Code: 1533028
SAVE 12%
Energy Label

Looking for ways to install?

More info »

Ways to install

All Nikolatesla extractor hobs allow for very flexible installation. In order to meet most installation needs, Elica has developed various installation solutions.

This hob can be connected to an external vent for extraction or can be installed to recirculate with one of the following recirculation kits.

RE-CIRCULATING INSTALLATION KIT “BACK OUTLET” (KIT0180522)

This kit allows the product to be converted into filtering mode. The air flow is conveyed backwards and left to flow, in the simplest possible way, into the interspace between the wall and the cabinet without the use of any additional pipes.

KIT0180522 includes:

  • Ceramic filters, 2 pieces
  • Telescopic outlet connection
  • Chrome-plated trim profile
RE-CIRCULATING INSTALLATION KIT UNDER PLINTH (MIN H6CM) “PLINTH IN” (KIT0167756)

If the product purchased is in duct-out mode, this kit will allow it to be installed in re-circulating mode. The filtered air will be conveyed into the cabinet base. A chrome-plated trim profile is provided for any vent slot, made in the cabinet baseboard.

KIT0167756 includes:

  • Ceramic filters, 2 pieces
  • 90° - 94 x 227 mm rectangular bend
  • 500 x 94 x 227 mm rectangular pipe
  • 90° rectangular bend from vert. 94 x 227 mm to horiz. 55 x 227 mm
  • Under baseboard deflector
  • Chrome-plated trim profile
  • Adhesive Tape
RE-CIRCULATING INSTALLATION KIT OUT OF THE PLINTH (MIN H6CM) “PLINTH OUT” (KIT0167757)

By purchasing this kit, it is possible to convert and install the product in re-circulating mode, thus conveying purified air into, and then outside the baseboard, through a special funnel-shaped pipe with an aesthetic profile on its edge, finishing the vent hole.

KIT0167757 includes:

  • Ceramic filters, 2 pieces
  • 90° - 94 x 227 mm rectangular bend
  • 500 x 94 x 227 mm rectangular pipe
  • 90° rectangular bend from vert. 94 x 227 mm to horiz. 55 x 227 mm
  • Outlet connection to be fitted outside the baseboard, provided with chrome-plated trim profile
  • 18 x 55 x 300 mm rectangular pipe
  • Outlet connection support
  • Adhesive Tape
£100 off use code COOK100
Was: £1699.00     You save: £200
£1499
Refurbished from £1099.97£ »
Installation available in basket
Why buy me
  • Spacesaving two appliances in one, a Hob and a Hood
  • Four induction zones
  • Bridge Zone down left hand side
  • Hard-working 620 m³/hr extraction rate
  • Extractor has 3 speeds and 2 Boost settings
  • Low noise level - just 57 dB(A)
  • Warranty period after registration 5 Years
  • Dimensions (cm): H36 x W72 x D16.7
click
Installation & Recycling
  • Room Of Choice & Removal Of Packaging
    Room Of Choice & Removal Of Packaging
    £14.99
click

Nikolatesla FIT allows maximum flexibility and can be either ducted or recirculated, solving all space issues without compromising on hood performance, cooking zone power, and dimensions, even in 60cm cabinets. The surface is continuous when aspiration is not required and air extraction can be activated by a simple switch, when needed. Moreover, NikolaTesla FIT automatically adjusts the aspiration level, maintaining the perfect balance between silence, power, and energy efficiency thanks to Autocapture technology. Grease and high-performance regenerable odour filters can be effortlessly removed from the top, and similarly, the inner part can be accessed to clean any accidental spills. Moreover, a special valve allows the drainage of any spilled liquids, thus ensuring maximum hygiene for your kitchen.

Comfort Silence
With the widespread tendency to design open-plan kitchens joined to the living room, it has become important to be able to rely on hoods with a greater extraction capability which is quieter, so they do not intrude on the surroundings. Thanks to Comfort Silence, the sound level of Elica extraction hoods at maximum extraction speed does not disturb or interfere with the conversation of those present.

Auto capture function
The aspiration system automatically adjusts based on the number of cooking zones being used and their power setting

Pot Detector
NikolaTesla helps you save time and money. It informs when a zone is ON and not being used, thus avoiding energy wastage, and automatically activates cooking zones are detected. All that's left to do is adjust the power level and enjoy your cooking.

Bridge Zone
When you cook using longer or large pans, there is a risk that the heat is progressively dispersed on the surface of the pan from the centre outwards. The Bridge Zone function solves the problem by joining two cooking areas into one single larger area. With the same power, uniform and constant temperature for the best result of your dishes.

Easy To Clean And Easy To Maintain
Keeping your hood clean not only ensures maximum hygiene in the kitchen but also long life for the product. The Elica models are designed with materials and finishes for instant maintenance operations. All the components, such as the grease and odour filters, can be easily accessed and removed so they can be washed or rapidly replaced.

Stop & Go
If you're in the kitchen and they call you from another room, or if you simply need a break. Simply pressing the Stop&Go key can deactivate all the cooking zones and move away in total safety.

Key Features

  • Spacesaving two appliances in one, a Hob and a Hood
  • Four induction zones
  • Bridge Zone down left-hand side
  • Hard-working 620 m³/hr extraction rate
  • Extractor has 3 speeds and 2 Boost settings
  • Low noise level - just 57 dB(A)
  • Warranty period after registration 5 Years
  • Dimensions (cm): H36 x W72 x D16.7cm
  • Cutout Dimensions (cm): W 56 x D 49cm
  • Fits into a 60cm kitchen unit for all the advantages of an aspiration hob even in compact kitchens
  • Integrated suction leaves a flat surface for easy cleaning
  • Use KIT0180522 for rear outlet recirculating
 
General information
Stock code NT-FIT-70
Brand Elica
Energy Type Electric
Hob Type Induction Hob
Number of electric zones 4 Zones
Colour Black
Warranty 5 years
Dimensions
Height 25cm
Width 72cm
Depth 52cm
Cut out width 560mm
Cut out depth 490mm
Features
Type of control Touch
Flexible cooking zones
Installation
Electrical Connection Requirements
Installation available in basket
Requires a qualified electrician to wire this in
Power Load 7.4kW
Minimum Power or Fuse Size 32A
Plug type None
Extractor
Extract/Recirculate Extraction & recirculation
Speed Settings
Multiple speed settings give ultimate versatility for a range of foods, the higher the setting, the finer the ingredients. Variable speeds give you even more control.
3 + 2 x intensive
Maximum Extraction Rate 620m³/hr
Maximum Noise Level 57dB
Product Detail
EAN code 8020283050556

To add to your order, simply select "Add to Order" and then add your product to basket as normal.

More Nikola Tesla products

See all Nikola Tesla products »

You may also like

Recently viewed


Back to top